Nederlandse taal English language Langue franšaise Deutsche Sprache Language Selector


Solid rustic oak QF5
Oak parquet 14 mm
Solid oak floor 22 mm
Local wood parquets
Outdoor wood
End Grain Parquet
Vintage 3D
Vintage wall cladding
Versailles Panels
Massive skirting
Panels for commercial spaces
Convector grill in oak
Snap-Tack secret nailing system
Oak Parquet 9 mm
Tables and furniture
Parquets in exotic wood 9 mm
Herringbone - Basket weave - mosaics
Colours and Finishings
Bestekteksten &  Plaatsingsvoorschriften
Our history
Privacy & Contact
A small bit about price
Wood species
Verzenden & Betalen

Additional Information

Quality standards

© Herrebout-Vermander NV
GSM +32(0)475489057
Tel +32(0)56355925
Industrielaan 14
8501 Kortrijk Heule


Herrebout Parket

Snap-Tack secret nailing system

Mosaic view - Turned mosaic view


From now on, stop pinning all those holes in your parquet floor. This system will render your work a lot easier: our secret nailing system is a revolutionary innovation in the field of putting 9 mm top floor parquets.

While most professionals put a traditionnal 9 mm floor by nailing it to the wooden subfloor with pins, through the board, leaving visible holes made by the pins, this system allows you to put a perfect board, without deliberately destroying it as if it was a Swiss cheese. Most of these little damaging holes are filled with wood-coloured filler, but for the fitter, they are nothing but an annoying waste of time, not in the least because after sanding, a lot of pins need to be sunken deeper the manual way, the holes they leave filled again.

The client also asks some questions, why all those holes are neccesary: plain damage to a beautiful parquet, filled with something that will come out again some day, collecting dirt, accentuating even more the holes drilled by the pinner.

Therefore, we advance the Snap-Tack secret nailing system for boards up to 22 cm wide. These boards are nailed in the tonges, which hold down the next board in its groove. You will be fitting this floor as fast as you did before and you minimize the damage from on top: no more little holes to fill. However, sometimes a nail from above is needed, especially with the ends -but at a ratio of 1 nail per square meter, you will see the difference.

It's an advantage: no holes means no filling, no additional work after sanding and less work sanding; The result is a perfectly fit wooden floor and a satisfied customer. Snap-Tack is available on all our 9 mm floors without additional cost.

It's the perfect solution for DIY as the system requires very few sanding skills.

Putting guide (pdf)

Snap-Tack joining

Snap-Tack joining

Snap Tack head

How to use the Snap-Tack

How to use the Snap-Tack

There is no cookie on your computer